Keep an Eye Out | 3-Ring Flip-Through

Published on Friday, March 29, 2024

Keep an Eye Out | 3-Ring Flip-Through

Above: Photo by Erin Orwig.

In the loading area, ground crew noticed that two rings of this jumper’s 3-ring assembly had flipped through the large ring. Although this error—which usually occurs during packing—is more common on larger 3-ring assemblies and on tandem rigs, it can also happen with type-17 risers and their smaller rings.

Jumping a 3-ring system configured this way is extremely hazardous. Not only might it prevent the ability to cut away, it also drastically increases the chance that the riser will release on that side during opening or when under load due to the high forces causing failure of the fabric 3-ring-retainer loop or even the large ring itself.  One manufacturer noted that they had seen a 3-ring system “explode” on opening when configured this way.

A gear check prior to donning the rig would have caught this error. The biggest enemy in this sport is complacency. No one is invulnerable. Check yourself. Check each other. And if you see something, say something.

Comments (0)Number of views (11444)
Print

Leave a comment

This form collects your name, email, IP address and content so that we can keep track of the comments placed on the website. For more info check our Privacy Policy and Terms Of Use where you will get more info on where, how and why we store your data.
Add comment
 

 

 
Photo by Javier Ortiz

Three trails flock across the sky during the Momentum Flock and Flow camp at Skydive Paraclete XP in Raeford, North Carolina.

Peregrine

 

Fyrosity

Jeana Billings D-38944
Profiles | Jan 01, 2025

Jeana Billings D-38944

Studying Hypoxia in Skydivers
Industry News | Dec 13, 2024

Studying Hypoxia in Skydivers

Fyrosity

Mahmoud Sharaf | D-41839
Profiles | Dec 01, 2024

Mahmoud Sharaf | D-41839

Flags Jumps Mark 9/11 Anniversary
People | Nov 18, 2024

Flags Jumps Mark 9/11 Anniversary

Fyrosity

Squirrel

1345678910Last