Sharpening the Safety Margin

Published on Friday, April 10, 2026

Sharpening the Safety Margin

Photo by Shauna Finley.

The USPA Board of Directors conducted a focused evaluation of recent tandem data including incidents, which revealed a pattern that warrants the attention of the tandem skydiving community. Most of these occurrences did not result from rare equipment failures or unpredictable conditions, but rather from breakdowns in the fundamental procedures performed on every jump. The analysis found that the most common contributing factors include delayed or incorrect emergency procedures, inadequate gear checks, improper student harnessing, and the absence of a hook knife.

The results of the board’s review reinforced a critical lesson: Serious outcomes rarely result from a single catastrophic failure, but rather a sequence of small errors aligning—often described as the "Swiss cheese effect." In several cases, preventable procedural deficiencies, such as improper harnessing, served as the final gap in that alignment.

New Requirements and BSR Updates
In response, the USPA Board has unanimously approved updates to tandem instructor renewal requirements and the Basic Safety Requirements. Effective June 1, the following standards apply:

    • Hook Knives: All tandem rating holders must be equipped with a readily accessible hook knife capable of severing Type 7 nylon webbing.

    • Aircraft Safety: All jump aircraft must carry a hook knife with the same capability, accessible to both the pilot and occupants.

    • Expanded Reviews: The existing six-month emergency procedure review now formally includes pre-jump safety elements. Instructors must demonstrate proficiency in:

          • Malfunction responses (via simulated handle pulls).

          • Correct student harnessing techniques.

          • Thorough gear checks and aircraft hook-up/exit procedures.

All demonstrations must align with the standard operating procedures specified by the equipment manufacturer.

These updates are not intended to add an unnecessary burden; they are designed to reinforce the fundamentals that have the greatest impact on tandem safety. While student harnessing and gear checks are routine, data shows that errors in these areas have compounding consequences. By integrating these elements into the renewal process, USPA aims to establish a consistent baseline of accountability across all drop zones.

To support this transition, USPA—in coordination with equipment manufacturers—will host a comprehensive webinar for instructors, drop zone operators and safety and training advisors. This session will provide practical guidance for integrating these requirements into Tandem Safety Days and pre-season seminars.

Clear communication is the bridge to a safer culture. By outlining these expectations well ahead of the June implementation, instructors and drop zones have the lead time necessary to prepare and ask questions. Through proactive education and collaboration, these updates represent a meaningful step toward reducing preventable incidents and strengthening the foundation of tandem skydiving.

Angie Aragon D-30898
AFF, Tandem and Coach Examiner
USPA National Director

Comments (0)Number of views (27)
Print
 

 

 
Photo by Alex Swindle

Jumpers launch from a Skyvan during Arizona Airspeed’s Intro(ish) to Bigways: Valentine’s Edition at Skydive Arizona in Eloy.

Skydive Store

 

USPA SIS

Threat to our Airspace
Gearing Up | Aug 01, 2017

Threat to our Airspace

Wednesday, July 26, 2017

Skydive Store

Sunday, July 23, 2017

Tuesday, July 18, 2017

Industry News | Jul 18, 2017

ATC Vote is Delayed

Ryan Risberg | D-22873
Profiles | Jul 01, 2017

Ryan Risberg | D-22873

Skydive Store

Take a Canopy Course
Gearing Up | Jul 01, 2017

Take a Canopy Course

Is Indoor Skydiving Skydiving?
Features | Jul 01, 2017

Is Indoor Skydiving Skydiving?

Saturday, July 1, 2017

Safety Check | Jul 01, 2017

Avoiding Deployment Collisions

Saturday, July 1, 2017

Skydive Store

First155156157158160162163164Last